linkedin nupigeco

facebook youtube





 

NIRON PRE-INSULATED PIPING SYSTEM

It is the innovative PRE-INSULATED PIPING SYSTEM that is ideally suitable for application in areas where the heat loss reduction is essential. This product range was specifically designed for networks for the distribution or adduction of hot fluids.

 

The reliability, ease of installation and relevant physical-mechanical properties of the materials used allow installers to overcome many problems when installing heat distribution and conditioning systems.

 

The possibility of burying the pipes directly eliminates costly masonry work. The total tightness inside tunnels or manholes guarantees a large lifespan. The ease of installation allows considerable time saving.


ADVANTAGES

  • Ease of installation and reduced installation time
  • Excellent thermal insulation
  • Low specific weight
  • Low pressure drop
  • Excellent weldability thanks to the fittings of the NIRON range
  • High resistance to corrosion
  • High durability
  • Reliable junction
  • Resistance to abrasion
  • Resistance to stray currents


FIELDS OF APPLICATION
The system is particularly suitable for the following underground applications:

  • District heating/cooling
  • Transport of energy on site and remote
  • Transport of hot water and drinking water
  • Swimming pools and spas
  • Cooling systems
  • Geothermal systems
  • Industry and agriculture



tubo-niron-preisolato SERVICE PIPE OR PRIMARY PIPE (NIRON RANGE)

The service pipe for the transport of the heat transfer fluid belongs to the random Polypropylene PP-R piping range by NUPI Industrie Italiane S.p.A. It is available in single wall version and multilayer version reinforced with fiberglass (NIRON FG and NIRON CLIMA).


tubo-niron-preisolato

THERMAL INSULATION (PUR)
The insulation of the primary pipe is made with a rigid polyurethane foam according to EN 253 standard and is free from Freon. The coefficient of thermal conductivity is 0.027 W/mK at a medium temperature of 50°C. This excellent characteristic of the material allows to obtain high levels of thermal insulation with significantly reduced insulation layers if compared to those that would be required if other materials were to be used. In addition, due to its closed cell structure, under normal conditions of use it does not have any transformation caused by water absorption, compression, sacking, etc.

 

JACKET PIPE (HDPE)
The layer of polyurethane insulation is protected by a jacket pipe made of High Density Polyethylene (HDPE) according to EN 253.

 

PRIMARY PIPE
It is available in 6 meter long sticks for diameters from DN 25mm to DN 50mm and 6/12 meter long sticks for larger diameters (DN 63mm up to DN 355mm).


FITTINGS AND FITTING REPAIR KIT

The junction of the NIRON PRE-INSULATED PIPING SYSTEM can be carried out by:

  • Polyfusion
  • Electrofusion
  • Butt welding


NIRON PRE-INSULATED PIPING SYSTEM fitting range includes
:

  • 45° elbows (codes NCPRE, NFGCPRE, NCLCPRE)
  • 90° elbows (codes NGPRE, NFGGPRE, NCLGPRE)
  • Reducers (code NRPRE)
  • Straight Tees (codes NTPRE, NFGTPRE, NCLTPRE)
  • Reduced Straight Tees (codes NTRPRE, NFGTRPRE, NCLTRPRE)
  • Reduced Branch Tees (codes NTBRPRE, NFGTBRPRE, NCLTBRPRE)
  • Fitting repair kit with hot shrinking rings and bottles of liquid foam (code NKITCO)
  • Fitting repair kit with pre-formed cups and hot shrinking bands (code NKITBO)